EMAC_PC_PINTFS=EMAC_PC_PINTFS_IMII, EMAC_PC_ANMODE=EMAC_PC_ANMODE_10HD
Ethernet MAC Peripheral Configuration Register
| EMAC_PC_PHYHOLD | Ethernet PHY Hold |
| EMAC_PC_ANMODE | Auto Negotiation Mode 0 (EMAC_PC_ANMODE_10HD): When ANEN = 0x0, the mode is 10Base-T, Half-Duplex 1 (EMAC_PC_ANMODE_10FD): When ANEN = 0x0, the mode is 10Base-T, Full-Duplex 2 (EMAC_PC_ANMODE_100HD): When ANEN = 0x0, the mode is 100Base-TX, Half-Duplex 3 (EMAC_PC_ANMODE_100FD): When ANEN = 0x0, the mode is 100Base-TX, Full-Duplex |
| EMAC_PC_ANEN | Auto Negotiation Enable |
| EMAC_PC_FASTANSEL | Fast Auto Negotiation Select |
| EMAC_PC_FASTANEN | Fast Auto Negotiation Enable |
| EMAC_PC_EXTFD | Extended Full Duplex Ability |
| EMAC_PC_FASTLUPD | FAST Link-Up in Parallel Detect |
| EMAC_PC_FASTRXDV | Fast RXDV Detection |
| EMAC_PC_MDIXEN | MDIX Enable |
| EMAC_PC_FASTMDIX | Fast Auto MDI-X |
| EMAC_PC_RBSTMDIX | Robust Auto MDI-X |
| EMAC_PC_MDISWAP | MDI Swap |
| EMAC_PC_POLSWAP | Polarity Swap |
| EMAC_PC_FASTLDMODE | Fast Link Down Mode |
| EMAC_PC_TDRRUN | TDR Auto Run |
| EMAC_PC_LRR | Link Loss Recovery |
| EMAC_PC_ISOMIILL | Isolate MII in Link Loss |
| EMAC_PC_RXERIDLE | RXER Detection During Idle |
| EMAC_PC_NIBDETDIS | Odd Nibble TXER Detection Disable |
| EMAC_PC_DIGRESTART | PHY Soft Restart |
| EMAC_PC_PINTFS | Ethernet Interface Select 0 (EMAC_PC_PINTFS_IMII): MII (default) Used for internal PHY or external PHY connected via MII 4 (EMAC_PC_PINTFS_RMII): RMII: Used for external PHY connected via RMII |
| EMAC_PC_PHYEXT | PHY Select |